G&G's booth at Shot Show 2010 (Also includes Top Tech products)

by Armorer 2/15/2010 2:23:00 PM

Last but not least... the G&G Booth.
Here we have the G&G version of the FN2000, the GN2000. This was a prototype unit that didn't yet have the hop-up unit installed, so there is a lot of mystery surrounding this one. The FN2000 certainly isn't for everyone, but the externals were a good match-up against the real thing.

G&G GN2000

G&G GN2000 Held.JPG

The L85 is just plain cool... It's already released, but it's very unique and comes complete with pnumatic blowback. This thing comes in 2 varients: the A1 and the A2. The version pictured below is the longer variant, the L85 A1. I didn't really want to put it back down, but eventually I had to move on.

G&G L85 A1 Bullpup Vertical

G&G L85 A1 Badass

On the first wall, in addition to the bullpup L85 mentioned above, we have "stockless" variants of the M4. Instead of a traditional stock, these only have a weighted stock tube to help balance the weapon (Thanks to RJ @ Chairsoft magazine for that explaination after seeing my puzzled look). There are awesome for CQB scenarios. Underneath them were some prototypes of the G96 line of gas powered sniper rifles. Some of these bodies are made from real wood, a really nice touch.

G&G Display Wall 1-1

The next wall shows the G&G Sig 550, now joined by 3 other length variants (The 551, 552, and 553). The build quality and overall look on these makes any Sig fan want to collect the whole set. At the bottom we have more variants of the G96 gas sniper rifles, we'll have a closer look at one later.

G&G Display Wall 1-2

More prototypes are seen below. Unfortunately in an image deleting spree we lost the display of the upcoming SCAR Heavy, but we can confirm it is on the way.

G&G Display Wall 2-1.JPG

These are a mix of all kinds of goodies...Some are entry level plastic bodies, some are the pro-line metal bodies, and some TopTech AEGs with blowback.

G&G Display Wall 3-1

G&G Display Wall 3-2

And even more goodies...

G&G Display Wall 4-1

G&G Display Wall 4-2

Here are some close-ups of the L96 gas sniper rifle. No release date or pricing information was available, but the L96 felt very sturdy. We are looking to add gas sniper rifles to our inventory, and this may be the one to finally do it.

G&G L96 Gas Sniper Rifle

G&G L96 Closeup

And nogw for the EBR. Surprisingly light for such a big weapon. We will really be keeping an eye on this one.

G&G EBR Weilded

G&G showed off a lot of goodies. As usual, there were a little light on the info, but we are used to that around here. Here is a video highlight of all the 2010 goodies

KWA's booth at Shot Show 2010

by Armorer 1/26/2010 10:09:00 PM

The KWA booth had several unexpected surprises!

KWA Booth Banner

First up were several configurations of the new KWA MP9: The KPM9 and KPM9R. This is not a rebranding of KSC's MP9 by any means. The SMG has been re-engineered with the NS2 Gas Blowback System. The KMP9 will be available with either a tac-rail or a foregrip. Both of these configurations will be available in Black, Tan, and Ranger Green. Expect to see them released around March or April!

The KMP9 with foregrip

KWA MP9 Sand Foregrip

The KMP9R with tac-rail

KWA MP9 Rail

KWA MP9 Stock Folded

There were rumors that KWA would be showing their prototype GBB M4. Well, here they are... Too bad you won't be able to get your hands on em until June or July!

KWA M4 Gas Blow Back Rifle LM4 PTR and SR7

The LM4 PTR and LM4 SR7 will be the two initial releases for KWA's GBB M4 line, but others are already planned. The guns feel incredibly solid. The only potential downside is that the grips will be proprietary. This design was necessary to support the blow back action and still conform with the ATF regulations that prevent the airsoft gun from being converted to fire a real rifle round. Overall, this was the best way to go. KWA will be making alternative compatible grips, as well as encouraging third party manufacturers to do the same.

KWA M4 Gas Blow Back Rifle Closeup

The prototype is pretty much complete, but KWA is still working to improve the durability of the magazines. Anyone who has used existing GBB M4s (such as the WE or Western Arms) may have encountered magazines that break from a few drops. Having GBB rifles supported by US distributers will be awesome for the airsoft community. In the event issues do arise, or repair parts are needed, they will be much easier to obtain. Classic Army had a GBB M4 prototype as well, stay tuned for the Spartan Imports booth write-up.

Speaking of gas powered guns, KWA is now making their own Green Gas! Air Armory will be carrying this product soon. Not much else to say, but I was able to man-handle a can of it.

KWA Branded Green Gas

Also on display were the latest line of KWA Gas Blowback pistols. There are many new designs and grips for the 1911 PTPs, as well as the brand new 2011.

The 1911 Mark I and Mark II PTP

KWA 1911 MK I and MK II PTP

The 1911 Mark III PTP

KWA 1911 MK III PTP

The 1911 Mark IV PTP

KWA 1911 MK IV PTP

And here are the 2011 Formula 5.0 and 5.1

KWA 2011 Formula Wall Display Closeup

There was also a new MK23 pistol on display, but we failed to snap a picture of that one... so here is a stock KWA image!

KWA MK23 Specwar
We'll post up as soon as these products are on the way to our shop!

Shot Show 2010 from Las Vegas: A day late and a dollar short (Updated!)

by Armorer 1/21/2010 4:21:00 AM

We have to apologize for the late first entry... Attending Shot Show 2010 in Las Vegas has been a double-edged sword. As far as positives go, Vegas is great fun, and the Sands Convention Center is massive. Unfortunately, there is so much to do around here that its hard to find time to resize/catalog all of images and write a decent entry to go with them. Oh, and we are down about $50 amoung several casinos. We better get used to it (and get better at gambling), because the Shot Show is already slated to be here for the next several years.

We will start adding pictures and information over the next couple days. For now, there are some highlights that deserve a shout out:
EDIT: Added a few pictures to this post - Lots more later!

Both KWA and Classic Army have Gas Blow Back (GBB) M4 prototypes on display. These were rumored to be in existance, but we have now held them (pics soon!). Apparently there has been dialog with ATF to make sure the design is compliant to prevent conversion to a real firearm, which was apparently an issue with the existing WE and Western Arms models from over-seas. Designs are near complete and we should see these released around half way through the year.


KWA M4 Gas Blow Back Rifles

Classic Army GBB M4 Display

Classic Army's Minigun is on display... very sexy! Some weight lifting will be required to field it.


Classic Army Minigun Angled

Classic Army Minigun Profile

KWA announced (and has on display) an MP9 with NS2 internals. There are foregrip and tac-rail configurations, as well as different color bodies. These are planned to be released within a couple months. This should go nicely with the just-released KWA branded green gas. They also have some sweet looking 1911 PTPs on display.


KWA GBB MP9s with NS2
KWA GBB 1911 PTP Line

Airsoft Innovations Detonation Impact Grenade is being pimped out via cut-away model. That means we will have these in stock soon!

Pantac USA has made thier debut with some very nice looking gear. Release time-frame is planned for mid-february.

MANY new products/brands will be added to AirArmory.com's inventory this year.

There is lots more, but it's almost 4AM here (7AM in my home-time-zone) and we have to function for at least 2 more days. Will post more ASAP, with pictures!

Magpul PTS Polymer Magazine (PMAG) Mid Cap Price DROP

by Armorer 10/21/2009 6:13:00 PM

Magpul PTS Polymer Midcap Magazines also known as PMAGs are now available for only $23.49.  These 120 round Midcap M4 magazines are replications of the real steal polymer PMAG magazine that Magpul has been making for many years.  PMAGs feature excellent construction and are compatible in most guns that would be considered TM compatible or to be conforming to the TM standard for airsoft AEG M4/M16 mag well feed tube design.


Magpul PMAGs are available in: Black, Dark Earth (Tan), Olive Drab , and Foliage Green.


Generally compatible Brands include:

  • Classic Army
  • G&G
  • JG
  • A&K
  • KWA
  • ECHO1
  • Tokyo Maru
BUY Magpul PTS PMAGs at our online store

 

Special Offer to introduce the Tornado Grenade and Airsoft Innovation's Product Line to AirArmory.com!

by Armorer 8/1/2009 10:00:00 AM
Well get straight to the Tornado Grenades:
Buy any color Tornado Grenade, and you'll receive a FREE maintenance kit AND the newly released Spoon Kit. That's a $30 value! 
(Note: The included maintenance kit comes with the new spoon kit locking pin, not the straight pin in the picture above.) 
   
Additionally, anyone who orders any single stack 1911 will receive an Airsoft Innovation Duster Adapter. These adapters are perfect for those hard-to-reach gas nozzles of Single Stack magazines that cannot be filled by some Green Gas and Propane cans.

You don't even need to enter a coupon at Checkout: Simply order your item, and we'll take care of the rest. Don't miss out on this awesome deal, we have a limited quantity of the free accessories! If you were considering picking one of these beauties up, now is definitely the time to pull the pin. 

For many shipping locations, a single Tornado Grenade purchase automatically qualifies for free shipping. West Coasters can add a Distraction Device Kit and a Burst Disc Refill Pack to cross the $120 order threshold for free shipping.

As mentioned in the previous post, we now also have the Maintenance and Spoon Kits available separately @ $15 each, for those already own Tornado Grenades.
 

AirArmory.com now stocking Airsoft Innovation's line of Airsoft products!

by Armorer 7/30/2009 8:26:00 PM
We are very excited to announce that we are now carrying Airsoft Innovation's products! 
 
Airsoft Innovations Category

Check out our complete Airsoft Innovations Category!

Tornado Grenades
Now available in Black, Yellow, Blue, and the newly released Flat Dark Earth (FDE)
Comes with a small bottle of AI Grenade Oil for those who prefer to use Propane over Green Gas.
 
Airsoft Innovations Tornado Grenade
Frag Out!

Tornado Maintenance Kits
Keep your Tornado Grenade running strong with these user servicable parts. 
 
Includes:
          • Valve cover
           Replacement valve cover for a damaged Tornado valve cover
         O-Ring set
           (2x) shuttle stem o-rings
           (2x) top cap/valve cover o-rings
           (4x) shuttle repair shrouds
          • Fill Valve
           A Replacement fill valve for your AI Tornado Grenade
          • Rubber Parts Set
           Replacement rubber parts for your AI Tornado Grenade.
           Includes a rubber bumper and blow out plug.
          • Grenade Pin
           Spare pin for your AI Tornado Grenade
Airsoft Innovations Maintenance Kit For Tornado Grenade
We have the Technology 

Tornado Spoon Kits
The much awaited Spoon Kit allows you to pull the pin in your Tornado Grenade without starting the timer. Instead, the timer will start as soon as you throw it, much like a real grenade! Some assembly required.
Airsoft Innovations Spoon Kit For Tornado Grenade
There is no Spoon
 
Distraction Device Kits
The Distraction Device Kit comes with a plastic ring to seal the gas from entering the BB chamber and force it out of the base of the grenade. It also includes a starter pack of 50 burst discs. The burst disc is used in place of the blow-out plug to make a loud popping sound as the gas is released. This kit allows you to easily change one Tornado Grenade back and forth between BB spraying "frag" grenade and a distraction device. 
Airsoft Innovations Spoon Kit For Tornado Grenade
This is my BOOM stick
 
Additional Burst Disc refill packs (50 discs each) are also available. Jiffy Pop

Nozzle Adapters
There are two flavors of adapter available from Airsoft Innovations:

GunGas (Propane Adapter) Kits
This kit includes a replacement cap/nozzle for a propane tank to fit most gas fill valves (Not just Tornado's!). Also includes a protective cap, a vial of AI oil, and a replacement tip (AI duster adapter). This is the new Version 5 with no assembly required.
 
Airsoft Innovations V.5 Propane Adapter Gun Gas Kit
 
Get your Flame on
 
Duster Adapters
These are available separately in a bright red color to avoid being lost in the fray. This can be used to use lower pressure computer duster gas in you gas powered arsenal. It also makes a great tip extention for hard to reach fill nozzles (such as 1911 single stack GBB magazines).
Airsoft Innovations Duster Adapter
 Just the Tip
  
Stay tuned for an introductory offer on the Tornado Grenades and Acessories!! 

KWA M4A1 with new Gear box in shop (pictures)

by Armorer 6/30/2009 10:12:00 PM

UPDATE

2009 KWA M4A1 Carbine

We have replaced the 2008 updated KWA M4A1 with the 2009 KWA M4A1 with new body and 2GX gearbox.

Now in stocking KWA M4A1's with 2GX Gearboxes

KWA KM4A1's with the new 2Gx Gear boxes are now in stock fresh in and ready for action.  KWA has sunk alot of R&D into the new 2GX gearbox and included with the package a 2G high performance bucking. 

These new boxes have been built up to be more durable in a number of key ways which include:

  • A new shell design to distribute load better and resist cold weather brittleness
  • Reinforced piston
  • Heat treated hardened components
  • 9mm gear bearings
  • Fixes from previous gearboxes including trigger post problem resolved late last last year

  Buy KWA KM4A1 With 2GX Gearbox

Airsoft's equivilent of an upskirt? Look at those curves.

 

The new marking on the KM4A1's Retail packaging.

 

  A look at the gearbox in the KM4A1

New Tactical Slings and Mounts from Condor releasing soon!

by Armorer 6/25/2009 10:47:00 PM

Coming (very) early in July: Brand New Condor Tactical Slings and Mounts made here in the USA!

 

First up is a new COBRA single point sling with dual bungies. Condor has a similar option available now, but this is redesigned for both function and quality by updating the snap hook and adding 2 additional quick-release buckles. Available in Black, Olive Drab, Tan, ACU*, and Multicam*.  

There is an upgrade kit for the COBRA sling to mount it directly to your chest rig. This should be a really popular option for players using Carbine and CQB length weapons. By distributing the weight to your vest, those long walks to respawn will feel a lot shorter! The quick release will always be right where you mount it, eliminating the need to look away from your target. Available in Black, Olive Drab, Tan, and ACU.

 
 

Next up is the CBT 2 point sling with dual bungies. This is ideal for larger weapons that you'd prefer to sling at your side. This sling also has a single point configuration (as seen in the lower image), making it an awesome choice for players that change their weapon loadout often. Available in Black, Olive Drab, Tan, ACU*, and Multicam*.

 

For those that want configuration flexibily, there is a Mash Connector upgrade kit that is compatible with all Condor's USA made slings. The kit allows you to convert one quick-release point to hoop connection. Available in Black, Olive Drab, Tan, and ACU.

 

The SPEEDY sling is your basic 2 point sling with no bungies, but adds the quick release buckle at both ends. This one uses a strap connection as opposed to the metal clasp of the other slings. Black, Olive Drab, Tan, and Foliage Green 

 

Condor is also releasing a high quality pistol lanyard. Not only can these prevent you from losing your side-arm, but it will also greatly reduce the impact from a drop. Available only in Black.

 


 
This post will be updated with links to these items as soon as they are in stock. We can't wait to see what other new items Condor has in store for us in 2009. Will the "Made in U.S.A." theme continue moving forward?
 
*Colors marked with an asterisk carry are slightly more expensive than the others.  

In stock and ON SALE: MAG brand mid-cap magazines

by Armorer 6/8/2009 8:14:00 PM

Today we are restocking all of our MAG brand mid-cap magazine offerings. Everything except VN style M16 magazines, unfortunately.

We will have the re-stocked MAG magazines listed at www.AirArmory.com shortly. Here is the list of what's available:
130rd M16/M4
100rd AKM (Brown) / 100rd AK74 (black/tan)
90rd MP5
100rd G36 (pair)
100rd Sig(pair)
50rd MP7 / 100rd MP7.

Mag Magazines

To celebrate our recovery from the MAG mid-cap shortage, we are offering a 15% discount on MAG magazine products for the next 2 weeks.

We also have a couple other discounts available to our customers at this time:
10% off on all AEGs and GBB Pistols
5% off of any other in-stock products

Visit Air Armory - Airsoft Discounts & Coupons For details

Product Updates - Updated KWA guns Now available - G&G SIG 550 Shipping shortly

by Armorer 5/12/2009 4:25:00 PM

We are starting to receive and add listings for the KWA AEGs with the Updated gear boxes in them.

They can be found in our KWA category starting with the KM16BR - M16 Battle Rifle and now the KG36C and other models as they arrive in.

 

We are also please to announce that G&G will be shipping SIG 550s as soon as tomorow.

 

Also - for anyone going to Operation Pine Plains II we now have G&G bio bbs in stock, weights available are .20's, .25's, and .28's.

Coordinator

Name of author The Armorer
Air Armory spills the beans as we see it

E-mail me Send mail

Calendar

<<  September 2010  >>
MoTuWeThFrSaSu
303112345
6789101112
13141516171819
20212223242526
27282930123
45678910

View posts in large calendar

Pages

    Recent comments

    Authors

    Ext - End Trans...


    © Copyright Air Armory 2009

    Sign in